Details

---

Convoluted PTFE Hose with SS316 Flared End Flange combines a flexible convoluted PTFE hose with SS316 flanged end connections. The complete assembly must be selected from the exact media, concentration, temperature, pressure or vacuum, flange standard, movement and installation conditions.

Flared-End PTFE Hose Assembly Overview

The convoluted PTFE hose structure is intended for routed connections where flexibility is required. The flared-end arrangement and flange details must be reviewed together with the hose construction, overall length and mating equipment.

Documented Hose and Connection Arrangement

Hose construction	Convoluted PTFE hose
End connection material	SS316
Connection arrangement	Flared-end flange

The PTFE flare, flange material, mating flange, bolting and any sealing requirements must be confirmed for the actual service.

Typical Industrial Applications

• Chemical and acid-transfer systems
• Pharmaceutical and biotechnology industries
• Food and beverage processing
• Oil, gas and petrochemical plants
• High-temperature fluid and steam-transfer services
• Industrial piping systems

These are general application areas from the existing product information. They do not confirm chemical compatibility, hygiene compliance, pressure, temperature or steam suitability without project-specific review.

Information Needed for Hose Selection

• Media name, composition and concentration
• Operating and design temperature
• Operating and design pressure, including surge or vacuum
• Required hose size, overall length and routing
• Flange standard, nominal size, pressure rating, face and drilling
• Required static or dynamic movement, vibration and bend radius
• Cleaning, testing, traceability and documentation requirements

Flared-End and Flange Considerations

• Confirm the PTFE flare arrangement and mating-flange face
• Align flanges without twisting or forcing the hose
• Use the specified bolting sequence and torque for the selected design
• Protect the PTFE flare and sealing surfaces from damage
• Verify whether a gasket is required for the final flange arrangement

Installation and Inspection

• Maintain the approved bend radius and avoid torsion
• Support connected piping to prevent unintended hose loads
• Allow access for flange inspection and future replacement
• Inspect the hose, braid where fitted, flare and flanges before service

Custom Hose Assembly Support

Advtech Engineering can review drawings, flange details, hose length and operating data for custom PTFE hose assemblies. Visit our hose connection and fabrication service page, or submit the mating-flange and piping specifications.

Frequently Asked Questions

Does the flared PTFE end eliminate the need for application review?

No. The media, temperature, pressure or vacuum, flange arrangement, movement and complete hose construction still require confirmation.

Can this hose be used for chemicals, food processing or steam?

It may be assessed for these services, but compatibility, cleaning, hygiene, pressure and temperature requirements must be verified for the proposed assembly.

What information is needed for a quotation?

Provide the media, temperature, pressure or vacuum, hose size and length, flange standard and rating, routing, movement, testing and documentation requirements.

Request a Flared-End PTFE Hose Quote in Malaysia

Contact Advtech Engineering (KL) Sdn Bhd for convoluted PTFE hose, SS316 flared-end flange connections and custom hose assemblies in Selangor, Kuala Lumpur and Johor Bahru.