Details

---

Stainless Steel 2-Piece Full Bore Ball Valve Overview

This stainless steel 2-piece full bore ball valve is a manually operated isolation valve for industrial piping. Its two-piece body, lever handle and straight-through flow path make it a practical option where buyers need compact shut-off control with threaded end connections. Advtech Engineering can review the required valve configuration against the customer's piping and operating information in Malaysia.

Two-Piece Design and Full Bore Flow Path

What does full bore mean?

A full bore or full port layout provides an internal passage intended to align closely with the nominal pipe bore when the valve is fully open. The actual bore dimension should be checked against the selected valve size and manufacturer data before ordering.

Manual lever operation

The lever provides clear open and closed positioning for manual isolation. Access for safe operation, locking requirements and the surrounding pipe layout should be considered during installation planning.

Threaded Connection Options

The existing product configuration lists BSP threaded ends, with NPT available as an option. Because BSP and NPT threads are not interchangeable, buyers should confirm the exact thread standard, nominal size, mating component and sealing method required for the line.

Confirm the complete connection specification

Share a drawing, photo or matching component details where thread identity is uncertain. This helps prevent cross-threading, poor engagement or an incorrect adapter selection.

Stainless Steel Body, Seats and Seals

The valve is described with a stainless steel body. The exact stainless grade, ball and stem materials, seat and seal compounds, and any material certificates must be confirmed for the selected item. Suitability depends on the complete wetted-material set rather than the body description alone.

Media and Application Review

Water, oil, gas, steam and chemical services are commonly considered for ball valves, but the listing of a medium is not a universal compatibility statement. Fluid concentration, contamination, temperature, pressure, cleaning method and applicable site rules must be reviewed before selection.

Information Required for Valve Selection

• Required nominal size, quantity and thread standard
• Fluid name, concentration and any solids present
• Normal and maximum operating pressure and temperature
• Required stainless grade, seat and seal material
• Installation orientation, operating frequency and access constraints
• Applicable standards, testing, certificates or documentation

Providing these details enables a more grounded engineering and commercial review.

Installation, Operation and Maintenance Notes

Pipework should be aligned and supported so that the valve is not used to correct misalignment or carry avoidable external loads. Use a sealing method appropriate to the confirmed thread type, avoid over-tightening, keep the bore clean, and perform the site's required inspection and pressure or leak test before service. Isolate and depressurise the system before maintenance.

Frequently Asked Questions

Is BSP the same as NPT?
No. Their thread forms differ. Confirm the mating thread before placing an order.

Can this valve be used for steam or chemicals?
Only after the exact valve materials, pressure-temperature rating and fluid conditions have been reviewed. A general media list is not a design approval.

What should I send for a quotation?
Send the size, thread type, fluid, pressure, temperature, quantity, required materials and any testing or documentation needs.