Details

---

Cement Discharge Hose 10 Bar Overview

This cement discharge hose is designed for transferring dry cement, pebble lime and selected abrasive dry materials. The product title identifies a 10 bar pressure class, while the existing construction information lists an abrasion-resistant SBR tube and cover with multiple layers of high-tensile synthetic cord reinforcement. Exact size and batch documentation should be confirmed before use.

Dry Bulk Material Discharge Service

Confirm discharge rather than suction duty

The hose is described for discharge of dry abrasive media. Do not assume suitability for vacuum or suction service unless a vacuum rating and construction are documented for the exact hose. Material density, particle size, flow velocity, bend layout and conveying method can all affect wear.

Tube, Reinforcement and Cover Construction

Published hose construction

The existing specification lists an antistatic black SBR-blend inner tube with high abrasion resistance, multiple layers of high-tensile synthetic cord reinforcement, and a black SBR-blend cover intended to resist abrasion and weather exposure. Confirm the exact construction, electrical-resistance requirement and test data for the supplied hose.

Pressure, Temperature and Safety Factor

Verify the complete assembly rating

The existing information lists a temperature range of -20°C to +80°C and a 3:1 safety factor. The 10 bar description must be checked as a working-pressure value for the selected hose size and operating temperature. Couplings, clamps and other assembly parts can reduce the allowable rating.

Abrasion, Static and Service-Life Considerations

Abrasive material can wear the tube, especially at bends, restrictions and areas of high velocity. Static-charge control requirements depend on the conveyed material and site risk assessment. An antistatic description does not replace continuity verification, grounding procedures or the applicable site standard.

Information Required for Hose Selection

• Material name, particle size, density and moisture content
• Hose inside diameter, required length and quantity
• Discharge pressure, surge conditions and conveying method
• Normal and maximum operating temperature
• Required bend layout, movement and installation orientation
• Coupling type, end connection and retention method
• Static-control, grounding, testing and certificate requirements

Photos or drawings of the existing equipment and connection points can support a more accurate assembly review.

Installation, Inspection and Replacement

Route the hose with adequate bend radius and support, avoid twisting and external abrasion, and use couplings designed for the hose construction and duty. Inspect the bore, cover, coupling retention and electrical-continuity provisions at intervals determined by service severity. Isolate and depressurise the conveying system before inspection or replacement.

Frequently Asked Questions

Can this hose be used for cement suction?
Not from the discharge description alone. Vacuum capability must be separately documented.

Does 10 bar apply to every hose assembly?
No. Confirm hose size, temperature, coupling method and the rating of every assembly component.

What information is needed for a quotation?
Provide the conveyed material, hose ID and length, pressure, temperature, routing, connection type, quantity and static-control requirements.