Details

---

Camlock Part C Overview

Part C combines a female camlock coupler with a hose shank. Confirm hose bore, mating adapter, material, gasket, pressure and media.

Published Options

• Materials: Stainless Steel 316, brass, aluminium, polypropylene.
• Sizes: 1/2 to 6 inches.
• Published maximum pressure: 150 psi, subject to exact configuration.

Match the Hose Shank

Hose construction and bore must suit the shank and approved retention method.

Verify Clamp or Ferrule

Improvised clamping can damage the hose or reduce retention.

Match the Male Adapter

Confirm manufacturer, series and nominal size; similar parts may not be interchangeable.

Check Both Cam Arms

Arms should close evenly without force. Do not hammer or modify components.

Material and Gasket Compatibility

Review media, concentration, cleaning chemicals and temperature for body and gasket materials.

Understanding 150 PSI

The published value is not universal and varies by size, material, temperature and assembly.

Lowest Rating Governs

The assembly is limited by its lowest-rated hose, Part C, adapter, gasket or valve.

Installation and Inspection

Inspect arms, pins, gasket, shank and retention hardware. Isolate and depressurise before handling.

Information Required

• Camlock size and series
• Hose bore and construction
• Retention method
• Body and gasket material
• Media and SDS
• Pressure
• Temperature
• Testing documents

Send details to Advtech Engineering before assembly.