Details

---

Bunkering Hose 15 Bar Overview

Hardwall hose for heavy-duty suction and discharge of oil, fuel and petroleum products in tanker-to-barge, bunkering and industrial transfer. Confirm product, aromatic content, pressure, vacuum, temperature and complete assembly.

Published Construction

• Tube: black NBR blend, described as fuel-resistant.
• Cover: black NBR-PVC blend, oil-, abrasion- and weather-resistant.
• Reinforcement: multiple high-tensile synthetic cord layers with helix wire.
• Embedded antistatic copper wire.
• Temperature: -20°C to +82°C.
• Safety factor: 3:1.

Understanding the 15 Bar Title

Confirm size-specific working pressure, surges, vacuum duty and manufacturer data. The title is not a universal assembly rating.

The Lowest-Rated Component Governs

Hose, flange, coupling, gasket, clamp and valve must be rated as one transfer system.

Fuel and Aromatic Content

The listing refers to aromatic content up to 50% and excludes ester-based oils. Verify the exact product, composition, additives and SDS.

Product Families Are Not Interchangeable

Fuel oil, diesel, lubricants and blends can affect materials differently; compatibility must cover every wetted component.

Suction and Discharge Conditions

Provide pump type, flow, suction lift, vacuum, discharge pressure and duty cycle. Avoid sharp bends and conditions that can collapse the hose.

Static Control and Continuity

The copper wire is a construction feature. Bonding, grounding and continuity requirements must follow the terminal, vessel and site risk assessment.

Test the Complete Assembly

If continuity is required, verify wire termination and test the finished assembly using the specified acceptance method.

Connections, Routing and Inspection:

Confirm bore, length, flange or coupling standard, gasket, orientation and support. Inspect for wear, exposed reinforcement, wire damage, leaks and loose fittings.

Safe Transfer and Isolation

Use trained personnel and the approved bunkering procedure. Before handling, stop transfer, isolate, depressurise, drain safely and control vapours and ignition sources.

Information Required for Review

• Product, aromatic content and SDS
• Working, surge and vacuum conditions
• Temperature
• Flow, bore and length
• Connections and gaskets
• Routing and movement
• Grounding and continuity
• Testing documents

Send details to Advtech Engineering before installation.