Details

---

Bunkering Hose 10 Bar is a hardwall hose for heavy-duty suction and discharge transfer of selected oil, fuel and petroleum products in tanker-to-barge, bunkering and compatible industrial duties. The exact media, aromatic content, temperature, pressure, vacuum, end connections and operating conditions must be reviewed before selection.

Bunkering Hose 10 Bar Construction

Tube	Black NBR blend compound described as fuel resistant
Cover	Black NBR-PVC blend compound described as resistant to oil, abrasion and weather exposure
Reinforcement	Multiple layers of high-tensile synthetic cord supported by helix wire
Static-control feature	Embedded anti-static copper wire

Published Service Information

• Listed temperature range: -20°C to +82°C
• Published safety factor: 3:1
• Published aromatic-content limit: up to 50%
• Published exclusion: ester-based oils

These figures are product information, not universal approval for every size or assembly. Confirm the current manufacturer data and the rating of the complete hose assembly.

Media Compatibility Review

Provide the full product name, grade, composition, additives, contaminants and current Safety Data Sheet. “Oil”, “fuel” or “petroleum” alone does not establish compatibility. Confirm aromatic content and whether ester-based components are present.

Pressure, Vacuum and Temperature

The 10 Bar product designation should not be used as the only selection criterion. State normal working pressure, surge, pump shut-off pressure, suction lift, vacuum and duty cycle. Also provide fluid and ambient temperatures because temperature can affect material performance and allowable pressure.

End Connections and Hose Assembly

Specify hose bore, overall length, flange or coupling standard, fitting material, gasket or seal, orientation and any movement requirement. The lowest-rated hose, fitting, flange, gasket, coupling or adapter limits the complete assembly. Advtech’s fabrication service can be discussed after these details are defined.

Static Control and Installation

The published construction includes an anti-static copper wire, but continuity is not automatic. If electrical continuity is required, specify wire termination, bonding, grounding and the test method for the finished assembly. Avoid twisting, kinking, unsupported weight and routing below the confirmed bend requirement.

Inspection and Information Required for Quotation

• Exact media, SDS, composition and aromatic content
• Working pressure, surge, vacuum and duty cycle
• Fluid and ambient temperature range
• Required bore, length and flow duty
• End-connection drawings and material requirements
• Routing, movement, handling and support conditions
• Static-continuity, testing and documentation requirements

For a broader pre-order checklist, see Bunkering Hose Malaysia: 8 Checks Before Oil and Fuel Transfer.

Frequently Asked Questions

Is Bunkering Hose 10 Bar suitable for every fuel?

No. Compatibility depends on the exact formulation, aromatic content, additives, temperature, pressure, hose size, fittings, seals and manufacturer data.

Does the anti-static wire guarantee electrical continuity?

No. Wire termination and the finished hose assembly must be checked using the specified continuity test when this is required.

What should be checked before ordering?

Confirm the media and SDS, pressures and vacuum, temperatures, hose size and length, connection details, routing, static-control criteria, inspection and required documents.

Request a Bunkering Hose Review in Malaysia

Contact Advtech Engineering with the operating information above for a configuration review. Final suitability remains subject to the exact hose, complete assembly, manufacturer documentation and transfer conditions.

Safety note: Trained personnel should follow approved terminal, vessel and site procedures. Isolate, depressurise and drain the line safely before handling, inspection or maintenance.