Details

---

Oil Suction Hose 20 Bar is a hardwall hose for suction transfer of selected oil and petroleum-based products with published aromatic content up to 50%. Selection must consider the exact media, suction or vacuum condition, pressure, temperature, hose size, fittings and installation layout.

Oil Suction Hose Construction

Tube	Black NBR blend compound described as oil resistant
Cover	Black NBR blend compound described as resistant to oil, abrasion and weather exposure
Reinforcement	Multiple layers of high-tensile synthetic cord supported by helix wire
Static-control feature	Embedded anti-static copper wire

Published Product Information

• Product designation: 20 Bar
• Listed temperature range: -20°C to +80°C
• Published safety factor: 3:1
• Published aromatic-content limit: up to 50%

Verify the current manufacturer data for the exact hose size and complete assembly. These figures do not establish universal suitability for every petroleum product or operating condition.

Media and Aromatic-Content Review

Provide the full oil or petroleum-product name, grade, composition, additives, contaminants and current Safety Data Sheet. Confirm the aromatic content and exposure duration. A general “oil resistant” description is not a compatibility approval.

Suction, Vacuum and Pressure Conditions

State the required suction lift, vacuum, normal working pressure, possible surge, pump shut-off conditions and duty cycle. Helix-wire reinforcement supports the hardwall construction, but the allowable vacuum and pressure must be verified for the exact size and service.

Temperature and Environmental Exposure

The listed range is -20°C to +80°C. Confirm the fluid and ambient temperatures, sunlight, radiant heat, weather exposure and cleaning process. Temperature can affect material performance and allowable pressure.

End Connections and Complete Assembly

Specify bore, overall length, flow duty, fitting type, thread or flange standard, fitting material, seal and orientation. The lowest-rated hose, fitting, coupling, flange, gasket or adapter limits the assembly. Advtech’s fabrication service can be discussed after these details are defined.

Static Control, Routing and Inspection

The hose construction includes an anti-static copper wire, but required continuity depends on correct termination and testing of the finished assembly. Avoid twisting, kinking, crushing and unsupported weight. Inspect the cover, hose ends and fittings for abrasion, cracking, softening, blistering, leakage or movement before use.

Information Required for Quotation

• Exact media, SDS and aromatic content
• Suction lift, vacuum, working pressure and surge
• Fluid and ambient temperature range
• Required bore, length and flow duty
• End-connection type, material and drawing
• Routing, movement, support and handling conditions
• Static-continuity, testing and documentation requirements

Frequently Asked Questions

Is Oil Suction Hose 20 Bar suitable for every petroleum product?

No. Confirm the exact composition, aromatic content, additives, temperature, pressure, hose size, fittings and manufacturer information.

Does the 20 Bar name confirm the rating of every assembly?

No. Verify the exact hose-size rating and the lowest-rated fitting, seal, coupling, flange or adapter in the completed assembly.

Does the anti-static wire guarantee continuity?

No. Where continuity is required, specify termination and test the finished hose assembly using the agreed method.

Request an Oil Suction Hose Review in Malaysia

Contact Advtech Engineering with the operating details above for a configuration review. Final suitability remains subject to the exact hose, complete assembly and verified manufacturer documentation.

Safety note: Trained personnel should isolate, depressurise and drain the system safely before inspection, disconnection or maintenance.