Details

---

Oil Suction Hose 10 Bar is a hardwall industrial hose for suction transfer of selected oil and petroleum-based products with published aromatic content up to 50%. Correct selection requires the actual media, suction or vacuum duty, pressure, temperature, hose dimensions, end connections and installation conditions.

Oil Suction Hose 10 Bar Construction

Tube	Black NBR blend compound described as oil resistant
Cover	Black NBR blend compound described as resistant to oil, abrasion and weather exposure
Reinforcement	Multiple layers of high-tensile synthetic cord supported by helix wire
Static-control feature	Embedded anti-static copper wire

Published Operating Information

• Product designation: 10 Bar
• Listed temperature range: -20°C to +80°C
• Published safety factor: 3:1
• Published aromatic-content limit: up to 50%

Confirm the current manufacturer data for the exact size and finished assembly. A product name or general material description does not establish suitability for every oil service.

Confirm the Exact Oil or Petroleum Product

Provide the media name, grade, composition, additives, contaminants, aromatic content and current Safety Data Sheet. Compatibility must cover the hose tube and every wetted fitting, seal, gasket and coupling.

Define the Suction and Vacuum Requirement

State suction lift, expected vacuum, pump conditions, flow rate and whether the service is continuous or intermittent. Helix-wire reinforcement supports the hose structure, but the permissible vacuum must be verified for the selected hose size and installation.

Review Working Pressure and Surge

The 10 Bar designation should not be treated as the rating of every completed assembly. Confirm normal working pressure, start-up or shut-down surge and the lowest-rated component. If a different pressure class is being considered, compare the actual requirement with the documented Oil Suction Hose 20 Bar option rather than selecting by name alone.

Check Temperature and Environmental Exposure

The listed temperature range is -20°C to +80°C. Confirm fluid and ambient temperatures, sunlight, radiant heat, weather exposure and cleaning conditions. Temperature can influence material performance and allowable pressure.

Specify Hose Size, Length and Connections

Provide bore, overall length, flow duty, fitting type, thread or flange standard, fitting material, seal and orientation. Advtech’s fabrication service can be discussed after connection drawings, dimensions and service conditions are defined.

Plan Routing, Static Control and Inspection

Avoid twisting, kinking, crushing, excessive pull and unsupported weight. If electrical continuity is required, specify wire termination, bonding, grounding and a test method for the completed assembly. Inspect the cover, hose ends and fittings for abrasion, cracks, softening, blistering, leakage or movement before use.

Information Required for an Engineering Review

• Exact media, SDS and aromatic content
• Suction lift, vacuum, flow and pump conditions
• Working pressure, surge and duty cycle
• Fluid and ambient temperature range
• Required bore, length and end connections
• Routing, movement, support and handling
• Continuity, testing and documentation requirements

Frequently Asked Questions

Is Oil Suction Hose 10 Bar suitable for every type of oil?

No. Confirm the exact formulation, aromatic content, additives, temperature, pressure, hose size and all wetted components.

Can the 10 Bar and 20 Bar versions be selected only by pressure name?

No. Review pressure, vacuum, size, construction, connections, routing and current manufacturer data for the complete assembly.

Does the embedded anti-static wire automatically provide continuity?

No. Required termination and continuity testing must be specified and verified on the finished assembly.

Request an Oil Suction Hose Review in Malaysia

Contact Advtech Engineering with the operating data above for a configuration review. Final suitability remains subject to the exact hose, complete assembly and verified manufacturer documentation.

Safety note: Trained personnel should isolate, depressurise and drain the system safely before inspection, disconnection or maintenance.