Details

---

Stainless Steel Camlock Flange Adapter Malaysia connects a cam-and-groove hose coupling to a compatible flanged pipeline or equipment connection. The current range lists Type FLA, with a male camlock adapter and flange, and Type FLD, with a female camlock coupler and flange.

FLA and FLD Camlock Flange Adapter Overview

FLA provides a male camlock adapter on the quick-connect side, while FLD provides a female coupler with cam arms. The flanged end connects to a matched flange using suitable bolts and a compatible flange gasket. Both ends must be specified correctly for the complete transfer system.

Current Listed Materials and Sizes

• Materials: stainless steel 304 and stainless steel 316.
• Types: FLA male adapter x flange and FLD female coupler x flange.
• Listed size range: 1/2 inch to 6 inches, with other sizes subject to enquiry.

Confirm material grade, casting or manufacturing details, dimensions and availability before ordering.

Flange and Camlock Compatibility

The current listing references ANSI B16.5, PN10/PN16 and JIS flange options. These standards are not automatically interchangeable. Provide the flange standard, nominal size, pressure class, facing, drilling pattern and mating connection. If project certification or dimensional compliance is required, request the relevant documents during quotation.

Pressure and Temperature Considerations

The existing listing indicates pressure up to 250 psi, varying by size and flange rating, and a temperature range from -20°C to 200°C. These values require confirmation for the exact adapter, seal, flange and application. The safe system limit is determined by the lowest-rated component and actual media compatibility.

Typical Industrial Applications

Camlock flange adapters may be considered for compatible chemical, oil, water, wastewater, agricultural, marine, food-related and other industrial transfer systems. They can provide a removable hose connection at a tank, pump, manifold or pipeline flange. Hygienic, hazardous or regulated service requires application-specific review and documentation.

Selection Information to Provide

• FLA or FLD configuration and camlock size.
• Stainless steel 304 or 316 requirement.
• Flange standard, nominal size, class, facing and drilling.
• Transferred media, working pressure, temperature and flow duty.
• Gasket and seal compatibility requirements.
• Quantity, drawing, mating flange details and documentation needs.

Installation and Inspection

Check flange alignment, gasket compatibility, bolt condition and camlock seal before assembly. Support connected hose and pipework so the adapter is not subjected to excessive bending or pull. Tighten flange bolts according to the applicable procedure, inspect the cam arms and gasket, and test the completed system under an approved site procedure.

Frequently Asked Questions

What is the difference between FLA and FLD?

FLA has a male camlock adapter end, while FLD has a female camlock coupler with cam arms. The mating camlock part must match the selected configuration.

Which flange details are needed for quotation?

Provide the flange standard, nominal size, pressure class, facing, drilling pattern and mating flange information. A drawing is recommended when replacing an existing adapter.

Can the listed pressure and temperature be applied to every size?

No. Limits vary with size, flange rating, camlock design, seal material, media and operating conditions. Confirm the exact product rating before use.

Need a Stainless Steel Camlock Flange Adapter Malaysia quotation? Contact Advtech Engineering with the FLA or FLD type, material, size, flange and service details.