Details

---

PVC F-Type Suction Hose is a medium-duty PVC hose reinforced with a continuous PVC helix for selected suction and discharge applications. The hose size, conveyed material, temperature, pressure or vacuum, fittings and installation conditions must be confirmed before use.

PVC F-Type Suction Hose Construction

The existing product information describes a flexible PVC hose with a continuous crush-resistant PVC helix and a smooth bore. The reinforced structure is intended to support medium-duty pumping and material-transfer applications.

Documented Size and Pressure Information

Size range	1 inch to 6 inches
Stated maximum operating pressure	Up to 7 bar for F-Type
Service type	Suction and discharge

The allowable pressure or vacuum may vary with hose size, temperature, media and installation. Confirm the applicable rating for the selected hose before use.

Typical Industrial and Agricultural Applications

• Pumping and transfer in industrial or agricultural operations
• Transfer of selected liquids, powders and granular materials
• Public-utility and drainage applications
• Ship and silo transfer duties
• Cable-conduit or underground-piping protection applications

These examples require confirmation of material compatibility, abrasion, static, pressure or vacuum and site conditions.

Information Needed for Hose Selection

• Liquid, powder or granular material being transferred
• Particle size and abrasion characteristics where applicable
• Operating and design temperature
• Pressure, suction lift and required vacuum
• Required internal diameter and hose length
• End fittings, clamps and connection method
• Routing, bend radius, handling and environmental exposure

Suction, Discharge and Material-Transfer Considerations

• Confirm vacuum capability for the selected size and temperature
• Check whether solids may cause abrasion, blockage or static accumulation
• Use suitable fittings and clamps for suction service
• Avoid sharp bends, kinks and external crushing
• Support the hose and prevent excessive pulling loads

Connection and Assembly Support

Advtech Engineering can review hose size, fittings, clamps and operating conditions for PVC suction-hose enquiries. Provide the pump connection, required length, media and suction or discharge data for review.

Frequently Asked Questions

Is 7 bar available for every hose size and temperature?

Not necessarily. The existing product information states a maximum operating pressure of up to 7 bar, but the applicable rating must be confirmed for the selected size, temperature and service.

Can the hose transfer powders and granular materials?

It may be assessed for selected powders and granules, but particle size, abrasion, static, flow conditions and hose compatibility must be reviewed.

What information is required for a quotation?

Provide the media, particle details where applicable, temperature, pressure or vacuum, hose size and length, fittings, routing and operating conditions.

Request a PVC F-Type Suction Hose Quote in Malaysia

Contact Advtech Engineering (KL) Sdn Bhd for PVC suction hose, fittings and industrial transfer-hose requirements in Selangor, Kuala Lumpur and Johor Bahru.