Details

---

PVC Ducting Hose is a lightweight flexible hose intended for selected ventilation, air-conveyance, fume-extraction and dust-collection applications. The conveyed air or particles, temperature, vacuum, chemical exposure, hose size and installation route must be reviewed before selection.

PVC Ducting Hose Construction

The existing product information describes a PVC hose reinforced with a continuous rigid-material helix. The construction is intended to provide flexibility and support the hose during light-pressure ventilation and conveying duties.

Documented Temperature Information

Stated operating temperature	-10°C to 60°C
Construction	PVC with continuous rigid helix reinforcement
Service description	Light-pressure ducting and conveying

The applicable temperature and vacuum depend on hose size, conveyed air or material, installation and environmental exposure.

Typical Industrial Applications

• Woodworking dust collection
• Ventilation and air conveyance
• Fume extraction
• Transfer of selected dust and lightweight powders

These applications require confirmation of chemical compatibility, particle abrasion, static risk, airflow, vacuum and any workplace-exposure requirements.

Information Needed for Ducting Hose Selection

• Air, fume, dust or powder being conveyed
• Chemical composition and particle characteristics where applicable
• Operating and peak temperature
• Airflow, suction pressure and required vacuum
• Required internal diameter and hose length
• Bend radius, movement and routing
• Static, grounding, clamp and support requirements

Fume, Dust and Static Considerations

Do not assume that general PVC ducting is suitable for every fume, solvent vapour, combustible dust or hazardous area. The actual chemical exposure, ignition risk, static-control method and site ventilation requirements must be assessed.

Installation and Inspection

• Maintain the approved bend radius and avoid crushing the helix
• Use clamps and connectors suited to the hose diameter and vacuum
• Support long runs and prevent excessive pulling loads
• Protect the hose from sharp edges, heat and incompatible chemicals
• Inspect the wall, helix and connections for wear or damage

Frequently Asked Questions

Can PVC Ducting Hose extract every industrial fume?

No. Suitability depends on the chemical composition, concentration, temperature, airflow, PVC compatibility and workplace-safety requirements.

Can it convey abrasive dust?

It may handle selected lightweight dust, but abrasion level, particle size, velocity and expected wear must be reviewed. A different hose construction may be needed for more abrasive solids.

What information is required for a quotation?

Provide the conveyed air or material, temperature, airflow or vacuum, hose diameter and length, routing, static and connection requirements.

Request a PVC Ducting Hose Quote in Malaysia

Contact Advtech Engineering (KL) Sdn Bhd for PVC ducting hose, clamps and ventilation-hose requirements in Selangor, Kuala Lumpur and Johor Bahru.